Demonstration 2 : Control4 + Neptronic (HVAC Controls Manufacturer)
Features:
1. 2-way communication with Control4 HVAC driver.
2. No inactive Control4 driver buttons once configured.
3. Feature-rich possibilities to suit a range of commercial applications.
Control Protocols Used:
1. Control4: Composer
2. KNX: ETS5 or ETS6
3. BACnet: Download and configure in MAPS
Free Download MAPS | Multi Addressing Points Solution | Intesis
System Integration Required:
1. Auto-scan BACnet device using MAPS and download the available points. Select the points that are needed.
2. Create and associate KNX ETS group addresses with BACnet points.
3. Control4 KNX driver: Input KNX Group Addresses; Set wording for modes with corresponding data (i.e. Off, Low, Med, High = 1,2,3,4).
Gateway Used: IN701KNX6000039
Currently Configured Addresses
ITEM | Device | IP Address | KNX Address | BACnet MAC Address | BACnet Device Instance |
C1 | IN701KNX6000039 | Currently DHCP | 1.1.253 | 21 | - |
C2 | NF TUUB30-207 | - | - | 22 | 153022 |
KNX | [as needed] |
|
|
|
|
Features
1. Easy Configuration using MAPS software
2. 2-way operation of the BACnet HVAC controller
Auto, Heat, Cool, Off
Setpoint control
Ambient Temperature
3. 2-way Controller Operation Feed Back
Heat, Cool
4. 2 Way Fan Speed Control
Auto, Low, Medium, High
5. CO2 Sensor Information
6. VOC Sensor Information
7. Humidity Sensor Information
8. Humidifier Control with setpoint
9. … and more
Comments